HiTHIUM HeroEE 2 1000W Pure Sine Wave 2kWh Power Station LiFePO4

HiTHIUM HeroEE 2 1000W Pure Sine Wave 2kWh Power Station LiFePO4

Buy HiTHIUM HeroEE 2 1000W Pure Sine Wave 2kWh Power Station LiFePO4 from Gears Wheel at a low price in Bangladesh if you need a high-capacity portable power station with a 1000W rated output, LiFePO4 battery technology, pure sine wave AC power, and both AC and solar charging support. The HiTHIUM HeroEE 2 is designed as an all-in-one energy storage system, combining the battery, inverter, and MPPT solar charging system in one portable unit. HiTHIUM lists the HeroEE 2 as a 2kWh portable power station with a 1000W rated output and LiFePO4 battery technology.

The HeroEE 2 is built around a lithium iron phosphate battery. Current product specifications list a 2009.6Wh battery capacity, while HiTHIUM’s product information identifies the model as a 2kWh-class power station. The battery uses 314Ah LiFePO4 cells, and HiTHIUM highlights an ultra-long battery cycle life of up to 11,000 cycles under specified test conditions.

In addition, the unit provides 1000W AC output with a pure sine wave waveform. That output makes the HeroEE 2 suitable for compatible electronics and appliances that fall within its rated power capability. It can also accept power from the electrical grid and compatible solar panels. Current product information lists a maximum PV input of 450W and a solar voltage range of 12V to 50V DC.

The design is focused on simple, integrated energy storage. Instead of requiring a separate battery, inverter, and solar controller, the HeroEE 2 combines these functions into one portable power station. HiTHIUM describes the product as plug-and-play, so users can connect compatible appliances and use stored power without installing a conventional fixed battery system.

For Bangladesh, this type of portable power station can be relevant for backup electricity, home electronics, workspaces, outdoor activities, and emergency power requirements. The exact runtime depends on the connected load, battery condition, conversion efficiency, and operating conditions. Therefore, the 2kWh rating should be understood as stored energy capacity rather than a fixed number of hours for every appliance.

Key Features

The main features include a 2kWh-class LiFePO4 battery, 1000W rated AC output, pure sine wave power, solar charging, AC charging, and an integrated design.

2kWh-Class LiFePO4 Battery

The HeroEE 2 uses LiFePO4, or lithium iron phosphate, battery chemistry. Current listings specify 2009.6Wh of battery capacity, while HiTHIUM describes it as a 2kWh portable power station.

LiFePO4 is widely used in stationary and portable energy storage. HiTHIUM lists a battery cycle life of up to 11,000 cycles under specified testing conditions. Actual battery life can vary depending on temperature, depth of discharge, charging patterns, load, and other operating conditions.

1000W Rated AC Output

The HeroEE 2 provides 1000W rated output power. HiTHIUM lists the model with a 1000W rated output, while Bangladesh product listings specify 230V AC, 50Hz and pure sine wave output.

Pure Sine Wave AC Power

The AC output uses a pure sine wave waveform. This is an important specification for users who want clean AC power for compatible electronics.

The current Bangladesh specifications list a typical inverter output of 230V and a 50Hz/60Hz operating frequency, while other product listings specify 230V AC at 50Hz.

Solar and AC Charging

The HeroEE 2 supports both AC electricity and solar charging. Current product information lists a 450W maximum PV input with a 12V to 50V DC solar input range.

This gives the system two primary charging methods. AC charging can be used when grid electricity is available. Solar charging can be used with compatible photovoltaic equipment.

Technical Specifications

The following table summarizes the specifications published by HiTHIUM and current product listings.

The exact specification can vary by documentation revision and regional listing. For example, HiTHIUM’s product page lists the HeroEE 2 as a 2kWh model with 1000W rated output, while a current Bangladesh listing gives 2009.6Wh and 18.3kg.

2009.6Wh Battery Capacity for Stored Energy

The 2009.6Wh battery capacity is one of the HeroEE 2’s most important specifications. Watt-hours indicate the amount of energy stored in the battery.

For example, a 100W load operating continuously would theoretically consume 100Wh per hour. A 2009.6Wh battery therefore represents a substantial energy reserve. Real-world runtime won’t equal a simple capacity divided by load calculation because inverter losses, battery characteristics, temperature, and device consumption affect actual results.

HiTHIUM’s official HeroEE 2 information provides several reference examples. It lists approximately 100 hours for a 20W lamp, 66 hours for a 30W fan, 20 hours for a 100W TV, 33 hours for a 60W laptop, 33 hours for a 60W car refrigerator, and 10 hours for a 200W hairdryer. These figures are manufacturer reference estimates and aren’t guaranteed runtimes for every setup.

The product information also gives a reference of around three hours for a 600W rice cooker and around 50 hours for a 40W coffee maker. Actual performance depends on how the appliances operate and their real power consumption.

LiFePO4 Battery Technology and Long Cycle Life

The HeroEE 2 uses LiFePO4 battery technology with 314Ah cells. HiTHIUM places particular emphasis on the long service life of the battery system. Its current residential product page lists a cycle life of up to 11,000 cycles for HeroEE products under specified conditions.

Cycle-life figures should be interpreted carefully. A cycle is related to the amount of energy discharged and recharged, and manufacturer test conditions matter. Temperature, discharge depth, charging behavior, and operating load can affect actual battery performance.

Still, the long-cycle specification is a major part of the HeroEE 2’s technical profile. It positions the product as an energy storage device designed for repeated use rather than a short-term disposable power source.

1000W Pure Sine Wave Output for Compatible Appliances

The 1000W pure sine wave output gives the HeroEE 2 a broader operating range than lower-output portable power stations.

The manufacturer lists examples such as car refrigerators, coffee makers, hairdryers, electric heaters, lamps, fans, televisions, laptops, projectors, and rice cookers. These examples demonstrate the range of loads that can fall within the system’s output capability, but actual compatibility depends on each appliance’s rated and startup power.

A device’s wattage matters. A 1000W-rated power station isn’t automatically suitable for every appliance. Equipment that exceeds the rated output, or has a high startup requirement, may not be appropriate.

The pure sine wave output is also a key specification. It provides AC electricity in a waveform designed for compatibility with many conventional electronic devices.

Solar Charging with Up to 450W PV Input

The HeroEE 2 supports photovoltaic charging. Current product information lists a maximum PV input of 450W and a PV voltage range of 12V to 50V DC.

Solar charging provides an alternative to grid charging. When suitable solar equipment is available, the power station can replenish its stored energy through the PV input.

The solar panel or solar array must remain within the power station’s specified voltage, current, and power limits. Therefore, the specifications of the solar equipment should be checked against the HeroEE 2’s input requirements.

Solar charging time also varies. Sunlight intensity, panel orientation, temperature, battery state, and other environmental conditions can change the amount of power produced.

Emergency Power Backup Function

The HeroEE 2 also provides an EPS emergency power backup function. HiTHIUM states that, during a sudden power outage, the power station can automatically switch to battery power within 20 milliseconds.

This function can help maintain power for compatible equipment when the primary electrical supply is interrupted.

Still, EPS specifications should be considered separately from a dedicated online UPS. Users should check the requirements of sensitive equipment before relying on any backup power system.

For home and workspace use, the EPS function adds another layer of usefulness because the unit can transition from grid power to stored battery energy when an interruption occurs.

Compact Integrated Design and Portability

Despite its 2kWh-class storage capacity, the HeroEE 2 combines its major energy components inside one enclosure. HiTHIUM describes the system as an all-in-one design containing the inverter, battery, and MPPT system.

Current specifications list dimensions of approximately 285 × 210 × 311mm and a weight of about 18.3kg.

That weight means the HeroEE 2 is portable, but it isn’t comparable to a small phone-sized power bank. Instead, it is a substantial portable energy storage unit designed to store and deliver considerably more electrical energy.

Its integrated construction also reduces the need for separate components in a portable setup. The manufacturer describes the HeroEE 2 as plug-and-play, making its basic operating concept straightforward.

Protection Features and Operating Conditions

Safety is a major part of the HeroEE 2 specification. Current product listings identify protection against several electrical and battery conditions.

These include:

• AC input over-voltage and under-voltage
• AC output over-voltage
• AC output overload
• AC output under-voltage
• AC output over-current
• Short circuit
• Battery over-voltage and under-voltage
• Battery overcharge and over-discharge
• Battery high and low temperature
• PV reverse polarity
• PV over-current
• PV overload
• Over-temperature protection

The current specification lists an IP20 ingress protection rating. Therefore, the unit shouldn’t be treated as a waterproof power station.

Temperature specifications also matter. Current listings specify a charging temperature range of 0°C to 40°C and a discharge temperature range of -20°C to 40°C. Storage temperature is listed as -20°C to 60°C.

HiTHIUM HeroEE 2 for Home Backup and Outdoor Power

The HeroEE 2 can serve several power-storage roles because it combines relatively high energy capacity with a 1000W output.

Home Backup

During an electricity interruption, the stored battery energy can provide power for compatible household electronics. The actual operating time depends on the connected load.

Workspaces

The 2kWh capacity can also be useful for work areas that need backup energy for compatible equipment. Laptops, networking equipment, displays, lighting, and other suitable electronics can operate according to their individual power requirements.

Outdoor Use

Solar charging also gives it an additional charging option where compatible photovoltaic equipment is available.

Emergency Energy Storage

The combination of LiFePO4 battery technology, pure sine wave AC output, EPS functionality, and multiple protection systems makes the HeroEE 2 a versatile portable energy storage platform.

HiTHIUM HeroEE 2 Compared With the 1kWh HeroEE 1

The HeroEE range includes models with different output and capacity levels. HiTHIUM lists the HeroEE 1 at 1kWh capacity and 200W rated output, while the HeroEE 2 increases the capacity to 2kWh and rated output to 1000W.

The HeroEE 2 therefore sits in a higher-capacity and higher-output position within the range. The choice between models depends on the required load and stored-energy capacity.

Frequently Asked Questions

What is the battery capacity of the HiTHIUM HeroEE 2?

HiTHIUM HeroEE 2 1000W Pure Sine Wave 2kWh Power Station LiFePO4 with a model that is specified as a 2kWh-class portable power station. Current Bangladesh listings give the battery capacity as 2009.6Wh.

What is the rated output power?

The HeroEE 2 has a 1000W rated AC output. HiTHIUM identifies the model as a 1000W portable power station.

Does the HeroEE 2 use a LiFePO4 battery?

Yes. The HeroEE 2 uses LiFePO4 lithium iron phosphate battery technology. HiTHIUM lists the battery as 314Ah cells.

Does the HeroEE 2 provide pure sine wave output?

Yes. Current product specifications list the AC output waveform as pure sine wave.

Can the HeroEE 2 be charged using solar power?

Yes. The HeroEE 2 supports photovoltaic charging. Current product information specifies up to 450W PV input and a 12V to 50V DC PV voltage range.

What is the battery cycle life?

HiTHIUM lists a battery cycle life of up to 11,000 cycles under specified conditions. Actual battery service life can vary according to operating conditions and usage.

What voltage does the HeroEE 2 output?

Current specifications list approximately 230V AC in inverter mode. Product listings also specify 50Hz output.

Does it support emergency backup?

Yes. HiTHIUM’s HeroEE 2 information describes an EPS emergency power backup function and states that the system can automatically switch to battery power within 20 milliseconds during a sudden outage.

How much does the HeroEE 2 weigh?

A current Bangladesh specification lists the weight at approximately 18.3kg.

What are the dimensions of the HeroEE 2?

The current product specifications list dimensions of approximately 285 × 210 × 311mm.

Key Takeaway

The HiTHIUM HeroEE 2 1000W Pure Sine Wave 2kWh Power Station LiFePO4 combines a 2kWh-class LiFePO4 battery, 1000W rated AC output, pure sine wave electricity, AC and solar charging, EPS backup functionality, and an integrated portable design. Current specifications list a 2009.6Wh battery, 450W maximum PV input, approximately 18.3kg weight, and 285 × 210 × 311mm dimensions.

The product offers a clearly defined combination of stored energy, output power, solar compatibility, LiFePO4 battery technology, and portable construction. Gears Wheel currently lists HiTHIUM portable power stations on its Bangladesh online store.

Related Products

Hithium HeroEE 1 1kWh Portable Power Station

Hithium HeroEE Light 1 500W Portable Power Station