Hithium HeroEE Light 1 500W Portable Power Station

Hithium HeroEE Light 1 500W Portable Power Station

If you’re looking to Buy Hithium HeroEE Light 1 500W Portable Power Station from Gears Wheel at a low price in Bangladesh, the HeroEE LIGHT 1 is a 1kWh-class portable power station designed for backup and portable energy needs. It combines a 1004.8Wh LiFePO4 battery with a 500W AC output, giving users a compact energy storage solution for compatible electronic devices. Hithium lists the HeroEE LIGHT 1 with AC and solar charging options, emergency power functionality, and a battery cycle life of up to 11,000 cycles under specified test conditions.

The HeroEE LIGHT 1 is built around LiFePO4 battery technology. This battery chemistry is widely used in energy storage systems, and Hithium specifies the battery cycle performance at 11,000 cycles under its stated testing conditions of 25°C, 100% depth of discharge, 0.5P, and 70% state of health. Real-world battery performance can vary depending on operating conditions and usage.

The power station provides 500W rated AC output. It also supports photovoltaic charging with a maximum PV input of 300W and a PV voltage range of 12V to 55V DC. Hithium states that the unit can reach a full charge in approximately two hours through AC power and approximately three hours through solar power under suitable conditions.

Another important feature is its emergency power function. According to Hithium, the system can automatically switch to battery power mode within 20 milliseconds when a sudden power outage occurs. This makes the feature relevant for compatible electronics that need continued power during an interruption.

The HeroEE LIGHT 1 measures 235 × 142 × 315 mm and weighs approximately 9.3 kg. Hithium lists an IP20 ingress protection level, along with CE, UN38.3, and IEC62619 certifications. Its specified charging temperature range is 0°C to 40°C, while the discharging range is -20°C to 40°C.

Hithium HeroEE Light 1 500W Portable Power Station Specifications

The technical specifications help explain exactly what this portable energy storage system offers. If you’re planning to Buy Hithium HeroEE Light 1 500W Portable Power Station from Gears Wheel at a low price in Bangladesh, these details are worth checking before making a purchase.

These specifications come from Hithium’s published product information. The manufacturer also notes that its specifications are provided for reference and that the specification sheet should prevail.

1004.8Wh LiFePO4 Battery

The 1004.8Wh battery capacity is one of the main features of the HeroEE LIGHT 1. It places this model in the 1kWh portable power station category.

The battery uses LiFePO4 cells. Hithium states a battery cycle life of up to 11,000 cycles under specified laboratory conditions. Those conditions include 25°C, 100% depth of discharge, 0.5P, and 70% state of health.

Battery capacity is measured in watt-hours. A watt-hour represents an amount of stored electrical energy. For example, a 100W device theoretically consumes 100Wh when operating for one hour. Actual runtime will vary because power conversion isn’t perfectly efficient and connected devices don’t always consume a constant amount of power.

This means the 1004.8Wh rating shouldn’t be treated as an exact runtime figure for every device. Instead, it provides a useful indication of the amount of energy stored inside the power station.

The LiFePO4 battery is also a key part of the unit’s long-life design. Hithium specifically highlights its battery cells and stated cycle performance as part of the HeroEE LIGHT 1’s specifications.

500W AC Output for Everyday Electronics

The HeroEE LIGHT 1 provides a 500W rated AC output. Hithium specifies 230VAC output in inverter mode with 50Hz/60Hz frequency support.

This output level is suited to compatible lower-power electronic equipment. Depending on their individual power requirements, devices such as laptops, networking equipment, chargers, LED lights, and some televisions may fall within the available output range.

Still, users should check the wattage of each appliance before connecting it. A device that requires more than the power station’s rated output isn’t an appropriate match.

Startup power can also matter. Some electrical devices briefly require more power when they start than they consume during normal operation. Therefore, checking the device specifications is important when determining compatibility.

The 500W rating gives the HeroEE LIGHT 1 a clear operating range. It’s a portable power station designed around a 1kWh battery and 500W output rather than a high-output whole-home energy system.

Fast AC Charging Capability

One of the notable features of the HeroEE LIGHT 1 is its charging speed. Hithium states that the power station can achieve a full charge through AC power in approximately two hours.

The unit has a listed AC input power of 500W and supports AC input from 100V to 270V at 50Hz/60Hz according to the published specifications.

Fast charging can be useful when the power station needs to be prepared again after use. Instead of requiring a long charging period, the stated two-hour full-charge time provides a relatively short charging window under the manufacturer’s conditions.

Actual charging performance can vary. Battery state, temperature, input conditions, and other operating factors can affect the charging process.

Solar Charging with Up to 300W PV Input

The HeroEE LIGHT 1 also supports solar charging. Hithium specifies a maximum PV input power of 300W, a PV voltage range of 12V to 55V DC, and a maximum PV input current of 10A.

Hithium states that a full solar charge can take approximately three hours under suitable conditions. Actual solar charging time depends on sunlight, panel performance, temperature, battery state, and other factors.

This solar input gives the power station an additional charging method beyond conventional AC electricity. When compatible photovoltaic equipment is available, the stored energy can be replenished using solar power.

The PV input specifications should always be matched with the specifications of the solar equipment being connected. The voltage and current limits are important parts of the system’s operating requirements.

Emergency Power Switching in 20ms

Power interruptions can happen unexpectedly. The HeroEE LIGHT 1 includes an emergency power function designed to respond quickly when the main power supply is interrupted.

Hithium states that the system can automatically switch to battery power mode within 20 milliseconds during a sudden power outage.

This function can be useful for compatible electronics that benefit from continued power. Networking equipment, computers, displays, and other suitable devices may be relevant depending on their power requirements and the way they respond to the transition.

It’s important to distinguish this switching feature from a guarantee that every electronic device will operate without interruption. Device compatibility and operating conditions can affect the result.

Portable and Compact Design

Portability is another part of the HeroEE LIGHT 1’s design. The unit measures 235mm long, 142mm wide, and 315mm high, with a published net weight of approximately 9.3kg.

Its compact dimensions allow it to be used in locations where a larger energy storage system would be impractical.

The 9.3kg weight means it’s portable, though it isn’t comparable to a small phone-sized power bank. It’s better understood as a compact energy storage unit that can be moved between suitable locations.

For indoor use, the unit’s size can make placement relatively straightforward. Users should still provide an appropriate environment that follows the manufacturer’s operating requirements.

Safety and Protection Features

The HeroEE LIGHT 1 includes several listed protection functions. Hithium identifies protection against over-voltage, under-voltage, reverse connection, power limitation, over-charge, short circuit, over-temperature, high and low cell temperature, and over-current.

These protection functions are designed around different electrical and thermal conditions.

The manufacturer also lists CE, UN38.3, and IEC62619 certifications for the product.

The IP20 rating is another specification to note. It means the unit isn’t presented as a waterproof power station. Therefore, it should be kept away from water and unsuitable wet environments.

Following the manufacturer’s operating instructions is important when using any energy storage product. The published temperature ranges should also be respected.

Applications for the HeroEE LIGHT 1

The combination of a 1004.8Wh battery and 500W rated AC output gives the HeroEE LIGHT 1 several potential applications.

Home Backup Power

The unit can provide stored electricity for compatible electronic equipment during power interruptions. Its emergency switching feature can also be useful for suitable connected devices.

Laptop and Computer Equipment

Laptops and other lower-power computing equipment can be suitable when their total power requirements remain within the station’s output capability.

Networking Equipment

Routers and other networking equipment generally use relatively low amounts of power. The available battery capacity can therefore provide useful backup time, depending on actual consumption.

Lighting

Compatible LED lighting equipment can be powered through the available AC output. The exact runtime depends on the combined wattage of the connected lights.

Television and Entertainment Devices

Compatible televisions and other consumer electronics can be used when their power requirements remain within the 500W rated output.

Portable Energy Storage

The 9.3kg form factor provides a way to move stored electrical energy between suitable locations without installing a fixed battery system.

Solar Power and Energy Storage

Solar charging adds another dimension to the HeroEE LIGHT 1. Instead of relying solely on grid electricity, the system can accept photovoltaic input within its specified range.

The 12V to 55V DC PV input and 300W maximum PV input power are important specifications when considering solar compatibility.

Hithium’s stated approximate three-hour solar charging time assumes suitable charging conditions. Real-world results can differ because solar generation changes throughout the day.

This is particularly relevant when using the power station as part of a portable solar setup. The solar panel or panels must meet the power station’s input requirements.

The system therefore provides two primary charging routes: AC electricity and solar power.

Hithium HeroEE LIGHT 1 Size and Operating Environment

The physical specifications are straightforward. The unit measures 235 × 142 × 315mm and weighs 9.3kg. Hithium lists operating humidity between 10% and 90%.

The specified charging temperature range is 0°C to 40°C, while the discharging temperature range is -20°C to 40°C.

The product has an IP20 ingress protection level. Consequently, it should be used in a suitable protected environment and shouldn’t be treated as a weatherproof outdoor device.

These specifications matter because environmental conditions can influence battery operation and electronic equipment performance.

Hithium HeroEE Light 1 500W Portable Power Station for Bangladesh

For customers searching to Buy Hithium HeroEE Light 1 500W Portable Power Station from Gears Wheel at a low price in Bangladesh, the core specifications provide a clear picture of the product.

The 1004.8Wh LiFePO4 battery provides the stored energy capacity. The 500W AC output determines the maximum rated power available for compatible AC devices. Meanwhile, the 300W PV input provides a solar charging option.

The product’s 230V inverter output is also relevant for Bangladesh’s electrical environment. Hithium lists 50Hz/60Hz frequency support and 230V output in inverter mode.

For users dealing with electricity interruptions, the emergency power function can be another important specification. Hithium states that automatic battery switching can occur within 20ms after a sudden outage.

Frequently Asked Questions

What is the battery capacity of the Hithium HeroEE LIGHT 1?

The HeroEE LIGHT 1 has a 1004.8Wh LiFePO4 battery. Hithium lists a cycle life of up to 11,000 cycles under specified test conditions.

What is the rated output of the HeroEE LIGHT 1?

The portable power station has a 500W rated AC output. Its published inverter-mode AC output is 230V at 50Hz/60Hz.

Does the HeroEE LIGHT 1 support solar charging?

Yes. It supports photovoltaic charging with a 12V to 55V DC PV input, maximum 300W PV input power, and maximum 10A PV input current.

How long does AC charging take?

Hithium states that the HeroEE LIGHT 1 can achieve a full AC charge in approximately two hours under its stated conditions.

How long does solar charging take?

Hithium states that a full solar charge takes approximately three hours under suitable conditions. Actual charging time can vary.

What battery chemistry does it use?

The HeroEE LIGHT 1 uses LiFePO4 battery cells.

How much does the power station weigh?

The published net weight is 9.3kg. Its dimensions are 235 × 142 × 315mm.

Can the HeroEE LIGHT 1 provide backup during a power outage?

Yes. Hithium states that the system can automatically switch to battery power mode within 20 milliseconds following a sudden power outage.

What protection features are included?

Hithium lists over-voltage, under-voltage, reverse connection, power limitation, over-charge, short circuit, over-temperature, high and low cell temperature, and over-current protection.

What certifications are listed?

Hithium lists CE, UN38.3, and IEC62619 for the HeroEE LIGHT 1.

What is the maximum solar input?

The maximum photovoltaic input power is 300W. The PV input voltage range is 12V to 55V DC, with a maximum input current of 10A.

Can it power every household appliance?

No. The HeroEE LIGHT 1 has a 500W rated AC output, so the connected equipment must be compatible with its power capability. High-power appliances may exceed this rating.

The Hithium HeroEE Light 1 500W Portable Power Station combines a 1004.8Wh LiFePO4 battery with 500W AC output in a compact 9.3kg design. It supports AC and solar charging, with Hithium stating approximately two hours for a full AC charge and approximately three hours for a full solar charge under suitable conditions.

Its maximum 300W PV input, 20ms emergency power switching, stated battery cycle life of up to 11,000 cycles, and listed protection functions make its specifications well suited to portable energy storage and backup applications. The unit also carries CE, UN38.3, and IEC62619 certifications according to Hithium’s published product information.

For customers who want to Buy Hithium HeroEE Light 1 500W Portable Power Station from Gears Wheel at a low price in Bangladesh, the product’s combination of battery capacity, AC output, solar charging capability, and portable form factor provides a clearly defined 1kWh-class power station option.

Related Products

Anker SOLIX C300 Portable Power Station 288Wh 300W